Filter
Top Products
125
Ink Film
Help
Incorrect Correct
Tight
6
Insert the three green gears into the remaining
cores of the new film.
Green gears
Guide tabs
Slots
7
Insert the film into the cartridge so that the blue
gear matches the “BLUE” on the cartridge.
●
The shiny side should be facing up.
Cartridge
Blue gear
“BLUE”
Film
8
Lock the four gears of the film by ( ) pushing
back the top side gears and ( ) pushing down the
bottom side gears until they lock into place.
●
If the film is slack, tighten it by winding the
bottom side gears.
B
A
Top
side gear
Bottom
side gears
Bottom
side gear
Top side
gears
A
B
9
Replace the film cartridge by first placing the front
of the cartridge into the unit and then lowering the
back of the cartridge, where there is an attached
sticker, into place.
Close the cover securely by pushing down on the
dotted area at both ends.
●
The unit will check that the film is installed
correctly. The following message will be displayed.
Display:
●
If the following message is displayed, the film is
not inserted correctly.
Reinsert it correctly.
CHECK FILM
PLEASE WAIT
Film
cartridge
Sticker
10
Incorrect Correct
Unlocked Locked