Filter
Top Products
7. When country/area data do not match:
a. Click OK
to replace the country/area data of the PBX. Replacement may take several minutes to
complete.
b. Follow the procedure described in Section "3.16.1 Starting the PBX (for KX-TDE100/
KX-TDE200)" or Section "3.18.1 Starting the PBX (for KX-TDE600)" in the Installation Manual
and restart the PBX.
c. Repeat step 5 to reconnect the Maintenance Console to the PBX.
8. Follow the instructions of the Quick Setup wizard for the basic items in Quick Setup—Step 1 to 3.
9. In Quick Setup—Step 4, the IP addressing information for the IPCMPR/IPCEMPR card can be
assigned automatically through a DHCP server or entered manually.
When using a DHCP server:
a. Select Enable for the DHCP Client setting.
b. Click Apply.
Note
The
boxes will turn grey and the IP addresses will be assigned automatically after the PBX is reset.
When not using a DHCP server:
a. Select Disable for the DHCP Client setting.
b. For KX-TDE100/KX-TDE200, type the IP address of the IPCMPR card in the IP Address for
IPCMPR
Card box. For KX-TDE600, type the IP address of the IPCEMPR card in the IP Address
for IPCEMPR Card box.
*1
c. In the IP Address for VoIP-DSP box, type the IP address of the DSP16 or DSP64 card.
*2
d. In the Subnet Mask box, type the subnet mask address of the network.
*3
e. In the Default Gateway box, type the IP address of the default gateway.
*4
f. Click Apply.
When using a DHCP server to obtain a DNS server IP address automatically:
a. Select DHCP for the DNS Server Address Method setting.
b. Click Apply.
Note
The boxes will turn grey and the IP addresses will be assigned automatically after the PBX is reset.
14 Programming Manual for Virtual SIP Trunk Card
2.1.1 Installing and Starting the Maintenance Console