Value Range
Shelf type
Slot
Indicates the slot position (reference only).
Value Range
Slot number
Port
Indicates the port number (reference only).
Value Range
Port number
Connection
Indicates the port status.
This column offers two ways to open the screen to select the port command:
• Click the desired cell in the column.
• Select the desired cell in the column, and then click Command.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
IP Codec Priority—1st, 2nd, 3rd
Specifies the priority of the CODECs to be used. None is only available for 2nd and 3rd priorities.
Value Range
G.711A, G.711µ, G.729A, None
Packet Sampling Time (G.711A)
Specifies
the time interval between measurements (samples) of sound data during a conversation. The smaller
this number, the higher the quality of the transmitted sound.
Value Range
10 ms, 20 ms, 30 ms, 40 ms, 50 ms, 60 ms
Packet Sampling Time (G.711µ)
Specifies the time interval between measurements (samples) of sound data during a conversation. The smaller
this number, the higher the quality of the transmitted sound.
Value Range
10 ms, 20 ms, 30 ms, 40 ms, 50 ms, 60 ms
Programming Manual for Virtual SIP Trunk Card 29
3.1.8 Voice/FAX