Filter
Top Products
4.1.2 V-SIPGW16 Protocol Trace
The
trace data of protocol activity can be collected from the V-SIPGW16 card and saved to the PC, using the
utility, V-SIPGW16 Protocol Trace.
This option requires that the target V-SIPGW16 card be set to INS status.
Follow the steps below to trace and file V-SIPGW16 card protocol activity:
Note
To access the following menu options, you must be logged in to the Maintenance Console in Batch or
Interactive
mode at Installer level. For details about the software mode and access level, refer to the On-line
Help.
To save trace data to the SD Memory Card
1. From the Utility menu, select V-SIPGW16 Protocol Trace.
When the progress bar disappears, the protocol trace is complete. The trace data has been saved to the
SD Memory Card (file name: "PRTSIPC").
To transfer trace data to the PC
1. From the Utility menu, select File Transfer PBX (SD Card) to PC.
The list of trace data files will be displayed.
2. Select the desired trace data file.
3. Click Transfer.
4. Navigate to the folder in which you want to save the file.
5. Enter a file name.
6. Click Save.
7. Click OK.
Programming Manual for Virtual SIP Trunk Card 49
4.1.2 V-SIPGW16 Protocol Trace