Filter
Top Products
56
“
Using the Network Management Web Screen
Using the function menu
Node Information
When you think you may have lost the connection to a node, or if you
want to know how many nodes are in a wireless network, this function will
help you. The screen provides an illustration that shows the entire logical
allocation of every node on a wireless network. To obtain detailed
information about each node as shown in below figure, move the cursor to
the illustration of the appropriate node.
To use this function, click [Node Info] on the web screen.
Node ID
IP Address
MAC Address
Firmware Version
Webserver Running
This ID is specified by the Master Node in the
wireless network.
The local IP address of the node.
The MAC (Media Access Control) Address of
the KX-HGC200.
The current version of the firmware written in
the KX-HGC200 Flash-ROM. To update the
firmware, see p. 65.
“Yes” or “No” is shown. If “Yes” is shown, the
wireless computer has been set to the Master
Node of the wireless network. If “No” is
shown, the computer has been set to a Client
Node. For more details about the Master
Node and Client Node, refer to p. 73.