Filter
Top Products
“
Setting up the Broadband Networking Gateway
22
Caution when initializing the Broadband
Networking Gateway
When the CLEAR SETTING button on the Broadband Networking
Gateway is pressed, all the parameters that have been set to the
Broadband Networking Gateway reset to the default setting. If the
KX-HGC200 is inserted and the WIRELESS indicator of the Broadband
Networking Gateway is turning green at that time, all the parameters
(Node Name, Channel Number, FEC, Network Name and Network ID)
reset to default settings also.
If you want to preserve the parameters set to the KX-HGC200, first
remove the KX-HGC200 from the Broadband Networking Gateway
referring to “Removing the KX-HGC200 from the Broadband Networking
Gateway” on p. 64, then initialize the Broadband Networking Gateway.
Note:
Before initializing, be sure to take notes of the setup parameters of
the Broadband Networking Gateway.