Filter
Top Products
64
“
Removing the KX-HGC200
4
Click [OK].
≥[Empty]–Socket XX is displayed.
5
Remove the KX-HGC200 from the PC card slot.
≥When the card has been removed, a beep should sound from the
computer.
Removing the KX-HGC200 from the
Broadband Networking Gateway
1
Make sure the Broadband Networking Gateway and other devices
that are used with the Broadband Networking Gateway are turned
off.
2
Open the cover on the front side of the Broadband Networking
Gateway.
3
1 Press the lever of the Broadband Networking Gateway along with
the PC card slot.
2 Remove the KX-HGC200 from the PC card slot.
4
Close the cover of the Broadband Networking Gateway.
INTERNET
ETHERNET
HomePNA
POWER
KX-HGW200
WIRELESS
Lever
Broadbaned
Networking
Gateway
LINK READY
11Mbps
Wireless LAN PC Card
KX-HGC200
1
2