Filter
Top Products
35
E
You can set the wireless display properties as follows.
1
Select [Wireless Display Setup Utility] in the following
procedure.
Windows XP [start] - [All Programs] - [Panasonic]
Windows 2000 [Start] - [Programs] - [Panasonic]
2
Enter the Supervisor Password.
The Supervisor Password is not set at the time of the pur-
chase.
Press the Menu button, select [Option], then set the Su-
pervisor Password. (
page 33)
3
Set the wireless display settings, TCP/IP and WEP.
You can set them for each profile.
Wireless Display Setup Utility
Changing the Wireless Display Settings
Change the profile name.
Change AES Encryption.
<When setting AES Encryption to something other than
[Disable]>
Select [Key], and set AES Key using phrase or binary,
then select [OK].
Change WEP Encryption.
<When setting WEP to something other than [Disable]>
Select [Key(s)], and set WEP Key(s), then select [OK].
When adding the check mark here, the MeiWDS profile
setting (one profile only), such as the password or AES
Encryption, is also set to the computer connected to the
wireless display.
After finalizing the settings, select [Next], then select
[OK].
(If another screen is displayed after selecting [OK], se-
lect [OK].)
(To next page)