Filter
Top Products
Remote control operation
ENGLISH - 23
Basic Operation
You can switch the input method manually
by pressing the INPUT button. Press the
button several times or press I H to cycle
through the input methods as follows. The
actual projected image will be changed in a
while.
Graphical guidance will be displayed on the upper right
of the display and you can confirm the selected input
method which is highlighted in yellow. See "INPUT
GUIDE" on page 38.
The aspect ratio is selected automatically,
or you can switch it manually by pressing
the ASPECT button. Press the button
several times to cycle through the different
aspect type as follows. See "ASPECT" on
page 35.
Switching the input signal
COMPONENT2 IN
COMPONENT1 IN
S-VIDEO IN
VIDEO IN
HDMI1 IN
HDMI2 IN
PC IN
COMPONENT1 IN
Connected to COMPONENT1
IN terminal equipment’s
signal
COMPONENT2 IN
Connected to COMPONENT2
IN terminal equipment’s
signal
S-VIDEO IN
Connected to S-VIDEO IN
terminal equipment’s signal
VIDEO IN
Connected to VIDEO IN
terminal equipment’s signal
HDMI1 IN
HDMI2 IN
Connected to HDMI IN
terminal equipment’s signal
PC IN
Connected to PC IN terminal
equipment’s signal
NOTE:
If you select an unplugged input method, the
guidance will blink on and off several times.
See "List of compatible signals" on page 45.
See "Connections" on page 18.
Switching the aspect ratio
VIDEO/
S-VIDEO/
COMPONENT
(YP
BPR)
PC (RGB)
HDMI
4:3
16:9
14:9
ZOOM1
ZOOM2
JUST
4:3
16:9
4:3
16:9
NOTE:
If you project an image with an unmatched aspect
ratio, the image may distort or some portions may
be cropped. Select an aspect ratio which
preserves the intention of the image creator.
The order of ASPECT types is defined not only by
the input method but also by the input signals.
See "List of compatible signals" on page 45.
If you project a copyrighted image enlarged or
distorted by using ASPECT function in
commercial use in a public place, such as a
restaurant or hotel, you might infringe on the
copyright of the creator which is protected by
copyright law.
PT-AE1000U.book Page 23 Monday, October 16, 2006 1:40 PM