Filter
Top Products
ENGLISH - 31
Settings
PICTURE Menu
Depending on the projection environment, you can use
these preset parameter settings to optimise image
projection. Press I H to cycle through the options.
You can adjust the contrast of the projected image.
Adjust the BRIGHTNESS in advance if necessary.
Setting range: -64 to +64
You can adjust the brightness of the projected image.
Setting range: -32 to +32
You can adjust the color saturation of the projected
image.
Setting range: -32 to +32
When PC is connected, this function is available with
1 125 (1 080)/60i, 1 125 (1 080)/50i,
1 125 (1 080)/60p and 1 125 (1 080)/50p signals
only.
You can adjust the skin tone in the projected image.
Setting range: -32 to +32
When PC is connected, this function is available with
1 125 (1 080)/60i, 1 125 (1 080)/50i,
1 125 (1 080)/60p and 1 125 (1 080)/50p signals
only.
You can adjust the sharpness of the projected image.
Setting range will vary according to the selected
input signal
You can adjust the white balance of the projected
image.
Setting range: -6 to +6
PICTURE MODE
NORMAL
Setting for a general image, such as
sports or games
DYNAMIC Bright and sharp setting
CINEMA1 Hollywood style colors
CINEMA2 Deeper and more rich color setting
CINEMA3 Vivid and crisp color setting
COLOR1
Setting for HDTV standard in
ITU-R BT. 709 and color temperature
6 500K at the default setting of the
PICTURE menu items.
COLOR2
Setting for DCDM standard and color
temperature 6 300 K at the default
setting of the PICTURE menu items.
NOTE:
It may take for a while until the selected mode is
stabilized.
CONTRAST
BRIGHTNESS
See “Navigating through
the MENU” on page 28.
HigherLower
BrighterDarker
COLOR
TINT
SHARPNESS
COLOR TEMPERATURE
Lighter Darker
More
reddish
More
greenish
More
sharp
Less
sharp
Less
reddish
Less
bluish
PT-AE1000U.book Page 31 Monday, October 16, 2006 1:40 PM