Filter
Top Products
85
Press the “ENTER” button.
The OPTION screen will be displayed.
Select “NETWORK SETTING” with the
buttons.
Initial setting of network function
Procedure of setting
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “OPTION” with the
buttons.
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
SECURITY
:MENU SELECT
ENTER:SUB MENU
OPTION
PROJECTOR ID 2
SETTING FRONT-F
LAMP SELECT DUAL
LAMP POWER HIGH
RS232C SETTING
OSD POSITION 2
SYSTEM INFORMATION
COLOR MATCHING 3COLORS
VIDEO SETTING
NETWORK SETTING
:MENU SELECT
ENTER:SUB MENU
NETWORK SETTING
HOST NAME PROJECTOR
DHCP OFF
IP ADDRESS 192.168. 0. 8
PORT 80
NET MASK 255.255.255. 0
GATEWAY 192.168. 0. 1
MAC ADDRESS 00.00.00.00.00.00
STORE
:MENU SELECT
ENTER:ADJUST
Press the “ENTER” button.
The NETWORK SETTING screen will be
displayed.
Select items with the buttons and
press the “ENTER” button to change
the setting.
Select the “STORE” with the
buttons and press the “ENTER” button
twice.
(Continued on next page)
Note
• The network settings are stored in the input module installed inside the projector. Perform
these settings again when the installed input module has been replaced.