Filter
Top Products
ENGLISH-23
Getting started
22-ENGLISH
Connecting to video equipment
DVD player
Computer for
control use
DVD player
Video deck
To S-Video output
To Video output
DVD player
SCART output
Serial adapter
(ET-ADSER : sold
separately)
DIN 8-pin (male)
NOTE:
B
When the device connected to SCART is turned on, the input select setting will
be switched to SCART automatically, and “ASPECT” (page30) will also be set
automatically. (When “WSS” is set to “ON”, refer to page 49 for details.)
NOTE:
BUse the HDMI cable with the HDMI logo.
BWhen connecting to equipment compatible with DVI, use the DVI - HDMI
adapter cable (sold separately).
B
This projector can be connected to HDMI and DVI equipment, but some
equipment may not operate correctly, for example images may not appear
.
Connections
Notes on connections
B
Read the instruction manual for each peripheral device carefully before connecting it.
B
Turn off the power supply for all peripheral devices before making any connections.
BIf the cables necessary for connection are not included with the peripheral
device or available as an option, you may need to prepare a proper cable
for the device concerned.
BRefer to the list on page 64 for details on compatible signals which can be
input to the projector.
BAn audio system circuit is not provided with this projector. Connect the
audio output of the connected equipment to a separate audio system.
To YPBPR output
DVD player
To HDMI output
HDMI cable (sold
separately)
Connecting to equipment compatible with HDMI
Computer for
control use
Serial adapter (ET-ADSER :
sold separately)
DIN 8-pin (male)