Filter
Top Products
ENGLISH-69
Others
68-ENGLISH
Dimensions
<Units: mm (inch)>
Projection dimensions calculation methods
Dimensions such as projection distances can be calculated from the screen
diagonal length. (Units for calculations: m)
SD
SW
16:9
LW/LT
SH
Screen Width: SW=SDx0.872
Screen Height: SH=SDx0.490
Minimum Projection Distance: LW=1.2244xSD-0.056
Maximum Projection Distance: LT=2.4449xSD-0.056
*The values obtained from the formulas above are approximate.
Cable specifications
(When connected to a personal computer)
1
2
3
4
5
6
7
8
7
8
3
5
2
6
1
4
9
At the projector
At the computer
(DTE specifications)
Command Contents Parameter
000=OFF 001=ON
VID=VIDEO SVD=S-VIDEO
RG1=PC YUV=YPBPR
SCT=SCART HDM=HDMI
Power conditionQPW
Input signal QIN
Picture modeQPM
NAT=NATURAL NOR=NORMAL
DYN=DYNAMIC CN1=CINEMA1
CN2=CINEMA2 CN3=CINEMA3
VID=VIDEO
Shutter functionQSH 0=OFF 1=ON
Freeze functionQFZ 0=OFF 1=ON
Inquiry commands
54 (2-1/8˝)
335 (13-3/16˝)
82.9 (3-1/4˝)
84 (3-9/32˝)
104 (4-3/32˝)
95
255 (10-1/32˝)
270 (10-5/8˝)
Aspect ratio
selection
VS1
The aspect ratio will be switched each time
the command is sent. (page 30)
Returning to the
default setting
OST
Use this command to return the setting to
the factory default.
(Continued from previous page.)