Filter
Top Products
50-ENGLISH
Adjustments and settings
AUTO SETUP
(PC only)
“H-POSITION”, “V-POSITION”,
“DOT CLOCK” and “CLOCK
PHASE” are automatically adjusted
according to the input signal.
Changing the display language
#Press the MENU button to display the menu screen.
$Select the “LANGUAGE” menu from the main menu, and then press
the ENTER button.
%Press the
FF
or
GG
button to select a language, and then press the
ENTER button.
NOTE:
BWhen the “ASPECT” is set to
“V SCROLL” (page 30), “AUTO
SETUP” cannot be performed.
Option settings
OSD
ON
The signal name is displayed in the
top-right corner of the screen when
the input signal is changed.
OFF
Use this setting when you do not
want the signal name to be
displayed.
OSD DESIGN
#Press the MENU button to display the menu screen.
$Select the “OPTION” menu from the main menu, and then press the
ENTER button.
%Press the F or G button to select an item.
&Press the I or H button to change the setting.
You can select the background for
the OSD from 3 types.
TYPE1
Transparent black
TYPE2
Solid blue
TYPE3
Transparent navy blue
OSD POSITION
You can select the position where
the OSD is displayed.
AUTO SEARCH
This should normally be set to “ON”.
ON
When the power is turned on, the
projector detects which signal is
being input, and uses that signal for
projection.
OFF
Use this setting when you do not
want the signal source to be
changed automatically when the
power is turned on.
NOTE:
BThe setting for “TV-SYSTEM”
will also be displayed when an
S-VIDEO/VIDEO signal is being
input.
keystone correction required is
as minimal as possible.
BThe picture size will also change
when correction of keystone
distortion is carried out.
BThe ratio of length and width of
an image may become incorrect
depending on the amount of the
keystone correction.
BKeystone distortion of the on-
screen display will not be
corrected.
BKeystone distortion may remain
depending on the lens shift
adjustment.
Indicates the language which
is currently set
ENGLISH-51