Filter
Top Products
25
ENGLISH
Automatic adjustment (AUTO SETUP)
Automatic adjustment function adjust the resolution, clock phase and image position automatically when dots-
structured analogue RGB signals such as computer signal are supplied. (Automatic adjustment is not available if
signals other than analogue RGB signals, moving picture input signals or signals having a dot clock frequency of
more than 100 MHz are supplied.)
It is recommended to supply images with a bright white frame at the outermost periphery containing characters etc.
that are clear in white and black contrast when the system is in automatic adjustment mode. Avoid supplying
images that involve halftones or gradation such as photographs and computer graphics.
• “CLOCK PHASE” may have been shifted even when the adjustment ended normally.
In this case, manually adjust the “CLOCK PHASE”.
• Automatic adjustments cannot be performed when images with blurred edges or dark images are input.
With C-SYNC and G-SYNC sync signals and some types of PCs, it may not be possible to perform
these automatic adjustments.
In this case, manually adjust the items of “INPUT RESOLUTION” , “CLOCK PHASE” and “POSITION”.
• Image may be disturbed for about 4 seconds during automatic adjustment, which is not an abnormal
error.
Note
Using the FREEZE function
The image on the screen can be frozen by pressing the FREEZE button on the remote control.
Using the SHUTTER function
If the projector is not used for a certain period of time during the meeting intermission, for example, a shutter mode
is available that allows the user to hide images temporarily.
Press the “SHUTTER” button of the remote control or the main unit.
The image is turned off.
Press the “SHUTTER” button again.
The image comes back.
Still image
Motion image