Filter
Top Products
55
ENGLISH
Interface ports
RGB2 input terminal
Video input/output terminal
S-video input terminal
Serial input/output terminal
Remote1 input/output terminal
Remote2 terminal
DVI-D terminal
LAN terminal
1 set of high-density, D-sub 15p (female)
[For YPBPR input]
Y: 1.0 V [p-p] synchronization signal included,
PBPR: 0.7 V[p-p] 75 Ω
[For RGB input] 0.7 V[p-p] 75 Ω For G-SYNC: 1.0 V[p-p] 75 Ω
HD/SYNC: TTL, high-impedance, positive/negative polarity
automatically adjusted
VD:
TTL, high-impedance, positive/negative polarity automatically adjusted
• However, HD/SYNC, and VD terminals are not compliant with 3-value
direct SYNC.
1 set BNC
1.0 V[p-p] 75 Ω
1 set Mini DIN 4p
Y 1.0 V[p-p] C 0.286 V[p-p] 75 Ω Compliant with S1 signals
D-sub 9-pin (male/female), RS232C compliant
Used for personal computer control
1 set each for M3 pin jack
Wired remote control, used for link control
D-sub 9-pin (female)
Used for external control
DVI-D 24-pin
RJ-45
Length of power supply cord 2.5 m
Cabinet Molded resin
Outside dimensions Width: 530 mm; Height : 167 mm; Depth: 425 mm
Mass
13.7 k
Working environment condition
2
Ambient temperature: 0 to 40°C
Ambient humidity: 20 to 80% (no condensation)
Remote control
Power source
Operation range
Mass
Outside dimensions
3 V DC (two AAA dry cells)
approx. 7 m (in front of beam receiver)
95 (including dry cells)
Width: 45 mm, Thickness: 23 mm, Depth: 145 mm
Option
Hanging attachment (For high ceiling) : ET-PKD55
Hanging attachment (For low ceiling) : ET-PKD55S
Projection lens : ET-DLE100, ET-DLE200, ET-DLE300, ET-DLE400, ET-DLE050
Wireless mouse receiver : ET-RMRC2
Replacement lamp unit : ET-LAD55 (single bulb), ET-LAD55W (double bulbs)
Long life lamp unit : ET-LAD55L (single bulb), ET-LAD55LW (double bulbs)
• The outside dimensions do not include the lens and other protruding parts. See page 58 for further details.
2
When using the projector at high altitudes (1 400 to 2 700 m), the upper limit for the ambient temperature drops
by 5 °C.
PT-D5500E PT-D5500EL
Model No.
12.9 k