Filter
Top Products
ENGLISH - 41
Chapter 3 Basic Operation — Switching on/off the projector
Switching on/off the projector
Connecting the power cord
Make sure that the supplied power cord cover is securely xed to the projector to prevent removal of the power cord.
Conrm that the <MAIN POWER> switch is on the <OFF> side before connecting the power cord.
For details of power cord handling, refer to “Read this rst!” (
x
pages 2 to 8).
Attaching
1)
Check the shapes of the <AC IN> terminal and
the power cord connector and insert the plug
securely in the correct direction.
2)
Attach the power cord secure lock along with
the guide on the <AC IN> terminal.
*XLGH
3)
Push in the tab of the power cord secure lock
until it clicks.
Tab
Removing
1)
Confirm that the <MAIN POWER> switch of the
projector is at the <OFF> side, and unplug the
power plug from the outlet.
2)
Press down the tab of the power cord secure
lock to remove.
Tab
3)
Remove the power cord secure lock from
the projector in the direction of the <AC IN>
terminal guide.
*XLGH
4)
Remove the power cord connector from the
projector <AC IN> terminal.