Filter
Top Products
84 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[LOAD ALL USER DATA]
Load the various setting values saved as a backup in the built-in memory of the projector.
1)
Press as to select [LOAD ALL USER DATA].
2)
Press the <ENTER> button.
rf
The [SECURITY PASSWORD] screen is displayed.
3)
Enter a security password and press the
<ENTER> button.
4)
When the confirmation is displayed, select [OK]
or [CANCEL], and press the <ENTER> button.
Note
rf
The projector will go into the standby status to reect the setting values when [LOAD ALL USER DATA] is executed.
[INITIALIZE]
Return various setting values to their factory default settings.
1)
Press as to select [INITIALIZE].
2)
Press the <ENTER> button.
rf
The [SECURITY PASSWORD] screen is displayed.
3)
Enter a security password and press the
<ENTER> button.
rf
The [INITIALIZE] screen is displayed.
4)
Press as to select an item to initialize.
5)
Press the <ENTER> button.
6)
When the confirmation is displayed, select [OK]
or [CANCEL], and press the <ENTER> button.
rr
Items that can be initialized
[ALL USER DATA]
All setting items including [ENTRY SIGNAL], [NETWORK SETUP], [E-mail set up], and [USER LOGO] are
returned to factory default values.
The projector will go into the standby status to reect the setting values.
[ENTRY SIGNAL]
Deletes all the setting values saved for each input signal.
To delete only a part of a registered signal, perform the procedure described in “Deleting the registered
data” (
x
page 86).
[NETWORK/E-MAIL] Returns [NETWORK SETUP] and [E-mail set up] to factory default settings.
[LOGO IMAGE] Deletes the image registered in [USER LOGO].
[SERVICE PASSWORD]
Used by a service person.