Filter
Top Products
98 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
[Basic control] page
Click [Projector control]
→
[Basic control].
(1)
(2)
(4)
(6)
(3)
(5)
1 [POWER]
Switches the power on/off.
2 [SHUTTER]
Switches between use or not use of the shutter function.
3 [OSD]
Switches between on (display)/off (no display) of the on-screen
display function.
4 [SYSTEM]
Switches the system method.
5 On-screen display of the projector
Displays the same content as the on-screen display of the
projector. The settings of the menu can be checked or changed.
This is displayed even when the on-screen display function is
set to off (hide).
6 [INPUT SELECT]
Switches the input signal.
[Detail control] page
Click [Projector control]
→
[Detail control].
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1)
1 Control of the projector
The projector is controlled by clicking the buttons in the same
way as the buttons on the remote control. After the projector is
controlled, the on-screen display of the projector on the right
side of the control page is updated.
2 [LENS]
Adjusts the projection lens.
3 [TEST PATTERN]
Displays the test pattern.
4 [GET OSD]
Updates the on-screen display of the projector at the right of the
control page.
5 [SUB MEMORY]
Switches the sub memory.
6 [SYSTEM DAYLIGHT VIEW]
Switches to system daylight view settings.
7 [FREEZE]
Temporarily pauses the image.
8 [SIDE BY SIDE] (only for PT-DW740U)
Displays two different input signals simultaneously.
[Network cong] page
Click [Detailed set up]
→
[Network cong].
rf
Click [Network cong] to display the [CAUTION!] screen.
rf
The current settings are displayed by pressing the [Next] button.