Panasonic PT-P1SDE Projector User Manual


 
SLOW
About 30 seconds
EFFECT
This sets the effect that is applied
when switching the still images in a
slide show.
OFF
No effect is applied.
WIPE
An image is wiped by the next
image from the left side.
FADE
An image darkens gradually and the
next image appears in turn.
SPLIT
An image is split from the centre
and the next image appears.
BLIND
An image is divided into stripe
pattern, and the next image
appears.
E
NGLISH-39
Useful functions
38-E
NGLISH
MODE
This sets the image which is
displayed on the screen when the
SD memory card is inserted.
PRESENTATION
This mode is used for making a
presentation without using a computer.
If there is only one
“PRESENTATION” folder, the first
image will be played back
.
If there is more than one folder, the
SD selection screen will be displayed.
MANUAL
The SD selection screen will be
displayed.
AUTO PLAY
This sets the playback method for
still images.
ON
The slide show will begin from the
selected file.
The files contained in the same
folder will be played back in order.
OFF
Only the selected file will be played
back.
INTERVAL
This sets the duration of the period to
change to the next file in the slide show.
NORMAL
About 10 seconds
FAST
About 5 seconds
AUDIO
ON
The sound is played back when a
file which contains sound is played
back.
OFF
The sound is not played back when
a file which contains sound is
played back.
CHECKER
An image is divided into checker
pattern, and the next image appears.
SLIDE IN
The next image slides into the
present image.
RANDOM
The various effects will be applied at
random every time the image is
switched.
NOTE:
B
It may take time for the images
to be displayed on the screen
depending on the images. In
such cases, the play interval may
become longer than the set time.
EFFECT OFF
[
WIPE
[
FADE
[
SPLIT
[
BLIND
[
CHECKER
[
SLIDE IN
[
RANDOM
Making a presentation without using a computer
You can make a smooth presentation without using a computer by following
the procedures below.
Preparation
# Connect the accessory mains lead
to the AC IN socket and insert the
mains plug into the mains socket.
$ Insert the prepared SD memory card
into the SD memory card slot.
The lamp will turn on automatically,
and the first image in the
“PRESENTATION” folder will be
played back.
% Operate by using the SD operation buttons. (Refer to page 18.)
MODE
PRESENTATION
ADJ RETRN
INTERVAL NORMAL
[
FAST
[
SLOW
NOTE:
BIf there is more than one “PRESENTATION” folder, the SD selection
screen will be displayed so that you can select a folder.
# Use ImageCreator 1.5 to convert the format of Microsoft PowerPoint
presentation file to a format that can be played back by this projector.
$ Store only one “PRESENTATION” folder created by ImageCreator 1.5 in
the SD memory card.
% Set “MODE” in the “SD PICTURE SETUP” menu to “PRESENTATION”
(page 38).