Panasonic SV-AV20U Power Supply User Manual


 
10
Power Supply
ªUsing AC Adaptor
1
11
1
Connect the AC Adaptor to AC Main
socket.
2
22
2
Connect the DC Input Lead to the
[DC IN 4.8V] socket on the SD Multi AV
Device.
ªCharging the Battery
1
While holding the [
] part, slide
it to remove the Battery Compartment
Cover.
2
Press the terminals of the battery onto
the terminals of the Battery
Compartment and set the battery.
Fit the battery with its label facing upward.
After the battery is set, close the cover.
3
Connect the AC Adaptor to AC Main
socket.
4
Connect the DC Input Lead to the [DC IN
4.8V] socket on the SD Multi AV Device.
Power Lamp flashes, and Charging starts.
When recharging, turn the power of the SD Multi
AV Device off.
5
Wait until Power Lamp
1
goes off.
When recharging is completed, Power Lamp
goes off.
If the Power Lamp flashes quickly (or slowly) when
recharging, recharging is not normal. (l
ll
l 49)
THE SOCKET OUTLET SHALL BE
INSTALLED NEAR THE EQUIPMENT AND
SHALL BE EASILY ACCESSIBLE
.
1
2
DC IN 4.8V
1
11
1
2
22
2
DC IN 4.8V
3
4
1