Filter
Top Products
18
REC
OFF
PLAY
Setting the Power Supply
Frequency
Set the power supply frequency before using the SD
Multi AV Device. The power supply frequency is
different depending on the country or region.
Adjustment of the frequency will help reduce the
appearance of horizontal stripes consisting of light
and dark patterns under fluorescent lighting.
1
11
1
Set the Power/Mode Switch to [REC].
(l 13)
2
22
2
Press the [MENU] Button.
3
33
3
Select [INITIAL SETUP] and press the
[1 SET] Button.
4
44
4
Set [AC MAINS]
to [50Hz] or [60Hz].
ªTo Reduce the Appearance of
Horizontal Stripes Consisting of Light
and Dark Patterns
If adjustment of the frequency does not have much
effect on reducing horizontal stripes, operate the SD
Multi AV Device as follows. (for MPEG4 mode and
PICTURE mode)
1
Set the Power/Mode Switch to [REC].
(l 13)
2
Press [ ] for approx. 1 second.
≥The [ ] Indication appears when the
horizontal stripes reduction function is activated.
To Release this mode
Press [ ] again.
≥Turning the power off will release this mode.
4
44
4
AC MAINS
RETURN
INITIAL SETUP
CARD FORMAT
60Hz
CLOCK SET
EXIT
MENU
1
2
INITIAL SETUP
DISPLAY SETUP
RETURN
SETUP MENU
QUALITY
FINE
BEEP SOUND
OFF
FLASH
OFF
EXIT
MENU
1
11
1
2
22
2
REC
OFF
PLAY
MENU
3
33
3