Panasonic UF-780/790 All in One Printer User Manual


 
Journals and Lists
119
Individual Transmission Journal (IND. XMT JOURNAL)
Printout Journals
and Lists
Explanation of Contents
(1) Printout date
(2) Printout time
(3) Journal number
(4) Communication result "OK" indicates that the communication was successful.
"BUSY" indicates that the communication has failed because of busy line.
"STOP" indicates that STOP was pressed during communication.
"M-OK" indicates that the substitute reception message in memory was not
printed out.
"P-OK" indicates that memory overflow or document misfeeding occurred while
storing the documents into memory for transmission but successfully stored
document(s) was sent.
"R-OK" indicates that the Confidential Communication was successful.
"3-digit Info Code (See page 132) indicates that the communication has failed.
(5) Number of pages transmitted
or received
The 3-digit number is the number of pages successfully transmitted or received.
When the documents are stored into memory, two 3-digit numbers will appear.
The first 3-digit number represents the number of pages successfully transmitted.
The second 3-digit number represents the total number of pages that were
attempted to be transmitted.
Asterisk "*" indicates that the quality of some received copies was poor.
(6) File number 001 to 999 (If the communication is stored into memory, a file number is assigned
for each communication.)
(7) Duration of communication
(8) Type of communication "XMT" means Transmission
"RCV" means Reception
"POL" means Polling
"PLD" means Polled
"FWD" means Fax Forward
"RMT" means Remote Diagnostic/Firmware Update
(9) Remote station identification Name : Recorded name in One-Touch or ABBR. Numbers or remote station's
Character ID.
Number : Dialed telephone number
Number : Remote station's ID number.
(10) Communication date
(11) Communication Start time
(12) Diagnostic For service personnel only
(13) Own LOGO Up to 25 characters
(14) Own ID number Up to 20 digits
(15) Own Character ID Up to 16 characters
(16) Type of communication Transmission or memory transmission
(17) Destination If a One-Touch or ABBR was used for the transmission:
One-Touch or ABBR. No./Telephone Number/Recorded Name
If not : Telephone number
(18) Received remote station's ID Character ID or ID Number
(19) Resolution "STD" means standard resolution
"FINE" means fine resolution
"S-FINE" means super fine resolution