Filter
Top Products
Customizing Your Machine
36
Fax Parameter Table
No. Parameter
Setting
Number
Setting Comments
01 CONTRAST *1 Normal Setting the home position of the CONTRAST key.
2 Lighter
3Darker
02 RESOLUTION *1 Standard Setting the home position for the RESOLUTION.
2Fine
3S-Fine
4 Halftone
(Fine)
5 Halftone
(S-Fine)
04 STAMP *1 Off Setting the home position of the STAMP key.
To select the stamp function when document is stored in
memory, see Fax Parameter No. 28.
2On
05 MEMORY 1 Off Setting the home position for memory transmission/copy
mode. (This setting can be temporarily changed by using
F8-9 (MEMORY XMT))
*2 On
06 DIALING METHOD 1 Pulse Selecting the dialing method.
*2 Tone
07 HEADER PRINT *1 Inside Selecting the printing position of the header.
Inside : Inside TX copy area.
Outside : Outside TX copy area.
No print : Header is not printed.
2Outside
3No print
08 HEADER FORMAT *1 Logo, ID No. Selecting the header format.
2From To
09 RCV'D TIME PRINT *1 Invalid Selecting whether the machine prints the received date &
time, remote ID, percentage of reduction and page number
on the bottom of each received page.
2Valid
10 KEY/BUZZER
VOLUME
1 Off Selecting the volume of the Key/Buzzer tone.
*2 Soft
3 Loud
12 COMM. JOURNAL 1 Off Selecting the home position of printout mode for COMM.
Journal Off/Always/INC.
Off : Does not print
Always : Always prints
Inc. only : Prints only when communication has failed.
2Always
*3 Inc. only
13 AUTO JOURNAL
PRINT
1 Invalid Selecting whether the machine prints the journal
automatically after every 32 transactions.
*2 Valid
17 RECEIVE MODE 1 TEL Setting the receive mode.
*2 FAX
3 FAX/TEL
SW.
4 TAM/FAX