Filter
Top Products
70
Making Copies
Your machine has a copy function which can make single or multiple copies.
NOTE
1. The copy will be reduced automatically depending on the length of the original document. If
you wish to be prompted for the reduction ratio when making copies, change the setting of Fax
Parameter No. 32 (COPY REDUCTION) to "Manual". (See page 37)
If Copy Reduction is set to Manual, press and to set the zoom ratio in 1% steps. (100%
to 70%)
2. If you make a copy with Super Fine resolution, it will be reduced slightly even if the reduction
ratio is set to 100% in order to fit the data on one page.
3. You can change the Contrast and Resolution without Standard Resolution in Copy Mode.
4. If you experience a memory overflow error while making copies, you may turn “Off” the
Memory XMT feature temporarily by pressing .
However, the printed copies will not be collated.
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
COPY
NO. OF COPY=1
3
Enter the number of copies.
Ex:
COPY
NO. OF COPY=10
4
The machine stores the document, then prints the copies.
* STORE * NO.005
PAGES=001 01%
* COPY *
NO. OF COPY=01/10
1 0
FUNCTION
8
9
SET
1