Filter
Top Products
42
Basic Transmission Settings
You can temporarily change the transmission settings either before or after you place the document on the
ADF.
These settings are as follows
•Contrast
• Resolution
•Stamp
• Communication Journal
After your document(s) have been sent, your machine will automatically return to the preset settings.
Your machine is preset to Normal contrast. If you wish to send a document with lighter contrast, change the
setting to Lighter. If you wish to send a document with darker contrast, change the setting to Darker.
Press to:
Your machine is preset to Standard resolution, which is suitable for most documents.
If you want to send it with more detail, change the setting to Fine, Super Fine or Halftone.
Press to:
NOTE
1. To change the preset Contrast position, change the setting of Fax Parameter No. 01. (See
page 36)
2. To change the preset Resolution position, change the setting of Fax Parameter No. 02. (See
page 36)
General Description
Contrast
Resolution
CONTRAST
CONTRAST = Normal
CONTRAST = Darker
CONTRAST = Lighter
RESOLUTION
RESOLUTION = Standard
RESOLUTION = Fine
RESOLUTION = Super Fine
RESOLUTION = Halftone (Fine)
RESOLUTION = Halftone (S-Fine)