Filter
Top Products
PROGRAMMING YOUR MACHINE
PROGRAMMING
YOUR MACHINE
29
017 RECEIVE MODE 1 Manual Setting the reception mode to automatic or manual.
2Auto
022 SUBSTITUTE RCV 1 Invalid Selecting whether the machine receives to memory when the
recording paper runs out, toner runs out or the recording paper is
jammed.
2Valid
024 PRINT REDUCTION 1 Fixed Selecting the print reduction mode.
Fixed: Reduce received document according to setting of
Parameter No. 25.
Auto: Reduce received document according to the length of
received originals.
2Auto
025 REDUCTION RATIO 70 70% Selecting the fixed print reduction ratio from 70% to 100%. This
parameter functions only when the fixed print reduction is selected
on Fax Parameter No. 24.
---- ----
100 100%
026 POLLING PASSWORD (----) Setting a 4-digit password for secured polling. (See page 73)
027 POLLED FILE SAVE 1 Invalid Selecting whether the machine retains the polled document(s) in
memory even after the document(s) is polled once.
2Valid
028 STAMP AT MEM. XMT 1 Invalid Selecting whether the machine stamps the originals when storing
into memory.
(depending on the Stamp setting on the Control Panel)
2Valid
031 INCOMPLETE FILE
SAVE
1 Invalid Selecting whether the machine retains the document in memory if
it is not successfully transmitted.
2Valid
033 XMT REDUCTION 1 Invalid Selecting whether the machine performs reduction when the
transmitting original is wider than the recording paper used at the
receiving machine.
2Valid
037 RCV TO MEMORY
(----)
Enter a 4-digit password for printing the received document(s) in
memory by using F8-5 (RCV TO MEMORY).
When F8-5 (RCV TO MEMORY) is set to ON, this parameter is not
selectable on the LCD display. (See page 93)
042 CONF. POLLED FILE
SAVE
1 Invalid Selecting whether the machine saves the confidential polled file
even after the file is polled once.
2Valid
043 PASSWORD-XMT 1 Off Setting a 4-digit XMT-Password and selecting whether the
machine performs and checks the XMT-Password of the receiving
station when transmitting. (See page 111)
2On
044 PASSWORD-RCV 1 Off Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
transmitting station when receiving. (See page 112)
2On
046 SELECT RCV 1 Invalid Selecting whether the machine performs selective reception.
(See page 109)
2Valid
048 TELEPHONE LINE 1 PSTN Selecting the type of line connected.
2 PBX
049 PSTN ACCESS
CODE
(----) Setting PSTN Access Code. (max. 4 digits)
Continued on the next page...
No. Parameter
Setting
Number
Setting Comments
Customizing Your Machine