Filter
Top Products
BASIC OPERATIONS
BASIC
OPERATIONS
35
Original (Text/Photo)
The Original setting is useful when sending photographs or illustrations with gray tones. Your machine is
preset to "TEXT". You can select either "TEXT/PHOTO" or "PHOTO" mode.
Verification Stamp
The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each
successfully transmitted page with a small mark.
(see Note 1) (see Note 2) (see Note 3)
NOTE
1. When you select TEXT/PHOTO, or PHOTO, you machine will automatically select Fine Resolution.
2. When you store document(s) into memory, the Verification Stamp will stamp on the original if it is successfully
stored into memory. In this case the Verification Stamp is not a confirmation that the document was successfully
transmitted. If you wish to disable the use of the Verification Stamp when storing document(s) into memory,
change the setting of Fax Parameter No. 028. (See page 29)
3. To change the preset Verification Stamp setting, change the Fax Parameter No. 004. (See page 28)
for text only originals
for text and photo originals
for photo or illustration originals
STAMP=OFF STAMP=ON
Basic Transmission Settings