Filter
Top Products
INFORMATION TO USER
NOTE: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15 of
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause interference in which case the user will be
required to correct the interference at his own expense.
WARRANTY INFORMATION
Our products are warranted to be free from defects in material and
workmanship at the time of sale but our obligation under this warranty is
limited to the replacement of any product proved to be defective within 6
months (for product) or 90 days (for printers) from the date of delivery.
Please remember to fill out the enclosed warranty card and return it to
Panduit. Printer warranty is void if Panduit printers are modified,
altered, or misused in any way. Use of Panduit printers with any product
other than the specified Panduit products for which the printer was
designed, constitutes misuse. Before using, user shall determine the
suitability of the product for his intended use and user assumes all risk
and liability whatsoever in connection therewith.
This warranty is made in lieu of and excludes all other warranties,
expressed or implied. THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE ARE
SPECIFICALLY EXCLUDED. Neither seller nor manufacturer shall be
liable for any injury, loss or damage, whether direct or consequential,
arising out of the use of, or the inability to use the product.
The information contained in this literature is based on our experience to
date and is believed to be reliable. It is intended as a guide for use by
persons having technical skill at their own discretion and risk. We do not
guarantee favorable results or assume any liability in connection with its
use. Dimensions contained herein are for reference purposes only. For
specific dimensional requirements consult the factory. This publication
is not taken as a license to operate under, or a recommendation to
infringe upon any existing patents. This supersedes and voids all
previous literature, etc.