Filter
Top Products
IPD1-A2-GZ40-00 February 2005 7
Procedure
1. Select a slot for installation. The 12000E is a fourteen slot chassis: slots 1–12
are reserved for interface modules and slots U1–U2 are reserved for
management modules. Although the 12000E is shipped with Port U1 open,
your management module can be installed in either Port U1 or Port U2. Only
one management module is required for operational purposes. However, two
management modules may be installed if redundancy is desired: one in Slot
U1 and one in Slot U2.
CAUTION:
If the blank plate is removed from Slot U2, it must be replaced with a
management module. DO NOT OPERATE YOUR 12000E WITH AN
EMPTY MODULE SLOT.