Filter
Top Products
IPD1-A2-GZ40-00 February 2005 9
Installing Your Interface Module(s)
Interface modules provide the subscriber connections for an 12000E; up to twelve
interface modules may be installed in the 12000E (slots 1–12). There are a variety
of models available for purchase; contact your sales representative for further
information or visit www.paradyne.com for a list of available products. Any
combination of interface module models may be installed in an 12000E as long as
they are supported by the model type and version number of your management
module; refer to the Release Notes for your particular management module model
for compatibility information.
Procedure
1. Select a slot for installation. Although the 12000E is factory shipped with Slot 1
open, interface modules may be installed in any slot, 1–12.
CAUTION:
If a blank plate is removed from slot 2–12, it must be replaced with an
interface module. DO NOT OPERATE YOUR 12000E WITH AN EMPTY
MODULE SLOT.
2. With the interface module PCB facing right and the interface module model
name upright, align the upper and lower edges of the PCB with the slot
module guides.