![](http://pdfasset.owneriq.net/7/cd/7cdf6871-8a68-435d-8866-277da3b1473f/7cdf6871-8a68-435d-8866-277da3b1473f-bg35.png)
Testing
7-2
7612-A2-GB20-10
November 1997
Tests Available
From the Test menu, you can run network tests, data port tests, and a lamp test
for the front panel LEDs. Loopbacks can be initiated locally and remotely. Refer to
Table 7-1, Loopbacks.
The Test menu is limited to users with an access level of 1 or 2. To access the
Test menu, follow this menu selection sequence:
Main Menu
→
Test
main/test
Device Name: Node A Model: 7612
TEST
Network Tests
Data Port Tests
Lamp Test
Abort All Tests
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
ESC for previous menu M
ainMenu Exit
Network-initiated tests require the participation of your network service provider.
The DSU supports physical-level tests independently on a per-interface basis.
H The CSU and DSU loopbacks and 511 test pattern send/monitor are
supported on the network interface.
H The Local Loopback and 511 test pattern send/monitor are supported on the
DTE port.