Filter
Top Products
Configuring the Hotwire DSLAM
3-4
8000-A2-GB26-10
January 1999
Configuring the Active VNID on each DSL Port
You can configure multiple VNIDs with different next hop routers with one active
VNID configured per port.
" Procedure
To configure the active VNID on each RADSL or MVL port from the Hotwire –
DSL menu:
1. Follow this menu selection sequence:
Configuration
→
Bridge
→
Port VNID
(A-E-C)
2. Enter the port number at the DSL Port #: prompt.
3. Enter a (to activate) at the Action(Edit/Activate/Deactivate):
prompt.
4. Enter the number of the VNID to be assigned to this port at the Input
Number: prompt. If you want a VNID that spans several RADSL or MVL
cards, you must specify the same VNID number across all cards.
Activate each port separately.
5. Press Ctrl-z and save the changes.
NOTES:
For more information about the fields listed above, see Table 4-4, Bridge
Options, in Chapter 4,
8310 MVL and 8510 RADSL Card Configuration.