Filter
Top Products
Configuring the Hotwire DSLAM
3-7
8000-A2-GB26-10
January 1999
Configuring IP Filter Rules
"
Procedure
Configure IP Filters and associated rules in the following sequence:
1. Define each filter. An IP filter consists of a set of rules.
2. Configure rules for each filter. TCP/UDP/ICMP traffic types can be selectively
forwarded or discarded based on the conditions specified in the rule.
3. Bind the filter to the interface using the General Interfaces screen (A-C-A).
This is an example of data contained in the IP Filter Table.
— An inbound filter acts on packets in the upstream direction from the client
to the NSP server.
— An outbound filter acts on packets in the downstream direction from the
NSP server to the client.
To configure the IP Filter attributes and rules, refer to
DSL Configuration Filters
Screen
in Chapter 4,
8310 MVL and 8510 RADSL Card Configuration.