Filter
Top Products
Monitoring the Hotwire DSLAM
5-22
8000-A2-GB26-10
January 1999
DSL Monitoring IP Filters Screen
Use the IP Filters screen to display configured filters.
" Procedure
1. Follow this menu selection sequence:
Monitoring
→
Filters
→
IP Filters
(B-G-A)
2. The IP Filters screen appears. The information displayed on this screen is
shown in Table 6-7.
Table 6-7. IP Filters
Filter Table (B-G-A)
The Filter Table screen displays the status of the IP filter.
Item # – Enter the item to display.
Filter Name – Name of the IP filter.
# of Rules – Number of rules in filter.
Default filter action – Forward/discard.
VNID – Interface and VNID to which the filter belongs.
Port – Port to which the filter belongs: slc–s1f.
Filter status – Active/Inactive.
Direction – Inbound/Outbound.
NOTE: To view the filter rules, you must have Administrator level access and use
the Configuration Menu (A-G-A). Refer to Table 4-6, IP Filters Options, in
Chapter 4,
8310 MVL and 8510 RADSL Card Configuration.