Filter
Top Products
3. Configuration Options
9000-A2-GB31-00 December 2002
3-81
TS Management SNMP Validation
Possible Settings: Enable, Disable
Default Setting: Disable
Specifies whether validation of community strings and IP addresses is performed for this
management link.
Display Conditions – This option only appears when:
Service Type on the Easy Install screen is set to Frame Relay.
TS Access Management Link is set to a PVC name.
Enable – Validation of community strings and IP addresses is performed on SNMP traffic.
Disable – No validation of community strings and IP addresses is performed.
Table 3-31. Node IP Options (4 of 4)