Filter
Top Products
3. Configuration Options
9000-A2-GB31-00 December 2002
3-7
Configuring PPP Options
PPP options are selected from the System menu (see Table 3-2, PPP Options).
The option appears only when Service Type is PPP.
Main Menu→Configuration→System→PPP
Table 3-2. PPP Options
PPP
Possible Settings: Independent, Port-1_Follows_Net
Default Setting: Independent
Allows you to pass the state of PPP from one interface to the other.
Independent – The state of PPP on one interface does not affect the state of the other.
Port-1_Follows_Net – The state of PPP on Port 1 depends on the state of PPP on the
Network 1 interface. If PPP is down on Network 1, the system brings down PPP on the
Port 1 interface and disables the port, causing the DSR, CD, and CSR control leads to be
deasserted. If PPP is up on Network 1, the system enables Port 1 and asserts the control
leads.