Filter
Top Products
3. Configuration Options
9000-A2-GB31-00 December 2002
3-89
Configuring Telnet and/or FTP Session Support
Telnet and FTP options control whether a Telnet or FTP (File Transport Protocol)
session is allowed through an interconnected IP network and the access security
applicable to the session. Two Telnet sessions can be active at a time (see
Table 3-34, Telnet and FTP Session Options).
Main Menu
→Configuration→Management and Communication→
Telnet and FTP Session
When a TS Access Management Link has been set up and activated, the following
options have no effect upon the PVC:
n Telnet Login Required
n Session Access Level
n FTP Login Required
Name 2 Access
Possible Settings: Read, Read/Write
Default Setting: Read
Specifies the type of access allowed to the objects in the MIB. This is the type of access
allowed for external SNMP managers accessing MIB objects using Community Name 2.
Read – Allows read-only access (SNMP Get command). This includes all objects
specified as either read-only or read/write in the MIB RFCs.
Read/Write – Allows read and write access (SNMP get and set commands).
Table 3-33. General SNMP Management Options (2 of 2)