Filter
Top Products
Index
IN-4 December 2002 9000-A2-GB31-00
Excessive Error Rate Threshold, 3-21
External
Transmit Clock, 3-33
External Transmit Clock, 3-37, 3-39
F
Frame Relay
assigning time slots, 3-51
configuring interface, 3-60
configuring system, 3-3
Discovery, 2-14
saving a mode change, 2-16
DS0s Base Rate, 3-61
setting mode, 2-4
frames, 3-83
FRF.8 Encapsulation Mode, 2-10, 3-71
FTP, 3-91
Login Required, 3-91
Max Transfer Rate (kbps), 3-91
Session, 3-91
G
G.991.2 Annex conformance, 3-27
Gateway Address
Default, 3-100
General
options, 3-14
SNMP management
options, 3-88
Traps, 3-94
glossary, v
H
HSSI
data port options, 3-38
network interface options, 3-30
specifying port type, 2-10, 3-39
Hunt (Line Rate Mode), 2-8, 3-26–3-27
hyperlink to more information
highlighted text, viii
I
IDSL
network interface options, 3-25
Ignore Control Leads, 3-102
ILMI, 3-71
Inactivity Timeout, 3-91, 3-103, 3-106
Inbound Calling ID, 3-49
Initial Route Destination, 3-94
Initialize_From_Network, 3-23
Interface PPP, 3-63
Interface Status
Ethernet port, 3-99
Network, 3-42
Internal
Transmit Clock, 3-33
Internal Transmit Clock, 3-37, 3-39
interoperability, DSLAM type, 2-5
Invert Internal Clock, 3-28
Invert Transmit and Received Data, 3-35
Invert Transmit Clock, 3-33, 3-37, 3-39
IP
default destination, 3-79
node information, 3-78
Validation
NMS, 3-92
IP Address, 3-83, 3-104, 3-107
distributing to other FrameSavers, 3-76
Ethernet port, 3-99
Modem port, 3-108
NMS number, 3-92, 3-94
Node, 2-5, 3-78
validation, 3-81
IP Enabled
DLCI Type, 3-65
IP SLV
availability traps, 3-98
ISDN
physical options, 3-44
setting up link profiles, 3-48
K
Keep, 3-63
Keep Alive (PPP), 3-63
L
LADS/LDM application, 3-23
Latching Loopback, 3-24
latency
setting threshold, 3-13
traps, 3-98
Leased Line
setting mode, 2-4
Line
Build Out (LBO), 2-7, 3-18, 3-22, 3-46
Coding Format, 2-7, 3-18, 3-42
Equalization, 3-43
Framing Format, 2-7, 3-18, 3-42, 3-45
Line Rate
DSL, 2-9
Network DSL, 2-9
SDSL, 3-26
SHDSL, 3-27
Line Rate Mode, 2-8, 3-26–3-27