Filter
Top Products
Monitoring
6-20
9820-A2-GB20-20
June 2000
Test Status Messages
These test messages appear in the right column of the System and Test Status
screen. You have the option of allowing the test to continue or aborting the test.
See Chapter 8,
Troubleshooting
, for more information on tests, including how to
start and stop them.
Table 6-12. Test Status Messages
Message
What It Indicates
DTE External LB Active, Port-1 An external DTE Loopback is running on the user
data port.
DTE Init. Ext LB Active, Port-1 The DTE has initiated an external DTE Loopback
on the user data port.
Lamp Test Active The Lamp Test is active, causing the LEDs on the
faceplate to flash on and off.
Monitor
Pttn
Active, DLCI
nnnn
,
frame_relay_link
1,2
The unit is monitoring a test pattern on the
specified DLCI on the specified frame relay link.
No Test Active No tests are currently running.
PVC Loopback Active, DLCI
nnnn
,
frame_relay_link
1,2
A PVC Loopback is active on the specified DLCI
on the frame relay link.
Send
Pttn
Active, DLCI
nnnn
,
frame_relay_link
1,2
The unit is monitoring the selected test pattern on
the specified DLCI for the interface.
1
nnnn
indicates a DLCI number of 16 through 1007.
2
frame relay link
is one of the following:
– Net1-FR1. The frame relay link specified for the network interface, Network 1.
– Port-1. The frame relay link associated with the user data port.