Filter
Top Products
10
CopperLink 1214E User Manual About This Guide
Safety When Working With Electricity
WARNING
• Do not open the device when the power cord is connected. For systems
without a power switch and without an external power adapter, line volt-
ages are present within the device when the
power cord is connected.
• For devices with an external power adapter, the power adapter shall be a
listed Limited Power Source. The mains outlet that is utilized to power the
device shall be within 10 feet (3 meters) of the device, shall be easily
accessible, and protected by a circuit breaker in compliance with local regu-
latory requirements.
• For AC powered devices, ensure that the power cable used meets all appli-
cable standards for the country in which it is to be installed.
• For AC powered devices which have 3 conductor power plugs (L1, L2 &
GND or Hot, Neutral & Safety/Protective Ground), the wall outlet (or
socket) must have an earth ground.
• For DC powered devices, ensure that the interconnecting cables are rated
for proper voltage, current, anticipated temperature, flammability, and
mechanical serviceability.
• WAN, LAN & PSTN ports (connections) may have hazardous voltages pres-
ent regardless of whether the device is powered ON or OFF. PSTN relates
to inter
faces such as telephone lines, FXS, FXO, DSL, xDSL, T1, E1, ISDN,
Voice, etc. These are known as “hazardous network voltages” and to avoid
electric shock use caution when working near these ports. When disconnect-
ing cables for these ports, detach the far end connection f
irst.
• Do not work on the device or connect or disconnect cables during periods of
lightning activity
WARNING
This device contains no user serviceable parts. This device can
only be repaired by qualified service personnel.
In accordance with the requirements of council directive 2002/96/
EC on Waste of Electrical and Electronic Equipment (WEEE),
ensure that at end-of-life you separate this product from other
waste and scrap and deliver to the WEEE collection system in
your country for recycling.
WARNING
This device is NOT intended nor approved for connection to the
PSTN. It is intended only for connection to customer premise
equipment.