Filter
Top Products
Driver installation for the Windows 2000 operating system 43
Model 2977 DialFire RAS User Manual 4 • Driver installation and configuration
Uninstalling the Driver
Use this procedure to uninstall the Microsoft Windows 2000 device driver.
Procedure
1. From the Start menu, choose Settings > Control Panel > Add/Remove Hardware > Next.
2. Choose Uninstall/Unplug a device > Next.
3. Choose Uninstall a device > Next.
4. Choose the device you wish to uninstall, then choose Next > Yes > Next > Finish.
Note
To prevent the driver from being automatically reinstalled when you
restart Windows, shut down Windows, turn off the computer and
remove the adapter. If you wish to disable the driver without physi
-
cally removing the adapter, choose Unplug a device in Step 3.
Using the Windows Troubleshooter
Use this procedure to help resolve any basic installation or configuration problems with a Microsoft Windows
2000 or Microsoft Windows NT adapter.
Procedure
1. From the Start menu, select Control Panel > System > Hardware > Device Manager.
2. From the displayed list, choose DialFire RAS as your network adapter.
3. Choose a Patton adapter.
4. Choose Actions > Properties > General to view the Device Status window.
5. If the Device Status window indicates that the device is not operating properly, choose Troubleshooting and
follow the instructions. Use Windows Help for more information.