Filter
Top Products
15
16
4) When the unit is first turned on, the terminal screen may
appear blank. Press the [Enter] key. If your serial connection is
good, the unit will immediately display a password prompt.
The following message will appear in the middle of the
screen:
5) Type in the password and press [Enter]. The factory default
password for the unit is (password is case sensitive):
patton
NOTE: If the entry is incorrect, the password screen will clear
and prompt you again for the correct password. The password
you enter will not be shown. For security, asterisks will be dis-
played for each letter you type. The maximum length of the
password, which can include any character the terminal can
generate, is 16 characters.
6) The Model 2720 will then display the Main Menu screen.
3.2.1 Introduction to Main Menu
After entering the password, you may access all of the system’s
functions and parameters. The Main Menu looks like this:
HELPFUL HINTS
1. To make a selection, key the highlighted letter that corre-
sponds to a menu selection.
2. To execute the selection, type [Enter/CR]
3. To toggle between options on a highlighted selection, Press
[space].
4. Select Save Changes from Main Menu after making modi-
fications to any Model 2720 parameter. Otherwise, changes
will be lost when the Model 2720 is turned off.
d
Patton Electronics
Menu Management
Enter Password: _