Filter
Top Products
614 Portion of field off tag. There may be an invalid
character in the packet. Make sure you did not enter O
for Ø.
615 Bar code width is greater than 16 inches or the number
of keywords for your PDF 417 bar code exceeds 928.
Decrease the density or shorten the amount of data to
print the bar code.
616 Dot shifting failed. A bad dot falls on a bar code that
cannot be shifted. Call Technical Support.
618 Magnification must be 1 to 7.
619 The JIS (16-bit) code for Kanji is invalid.
Machine Faults
Errors 700 to 793 occur when there is a problem with the printer.
703 The printer sensed a calibration of different-sized black
marks. Make sure the correct supply is loaded.
704 Printer has not sensed a supply mark within the
specified number of inches or out of supplies.
Check the
✦ supply tracking
✦ supply marks
✦ black mark sensor position
✦ supply roll for binding.
Press the FEED button. If the error continues to
appear, change the supply.
750 Printhead is overheated. Turn off the printer to let the
printhead cool. If the error persists, call Technical
Support.
751 Printer did not sense a black mark when expected.
Errors 9-13