Filter
Top Products
Defining the Batch Control Field
The batch header must precede this field. The batch control field
defines the print job and applies only to the batch that
immediately follows.
Syntax
E,feed_mode,batch_sep,print_mult,
multi_part p
E1. E Batch Control Field.
E2. feed_mode Feed Mode. Options:
0 Continuous Feed (default)
1 On-demand
For the 9412/9413 printers, you must have the on-demand
sensor installed to use on-demand mode. Also, the feed
mode is determined by the presence of the on-demand
sensor, not from this parameter. If the on-demand sensor is
open, you are using on-demand mode. If the on-demand
sensor is closed, you are using continuous mode. There is a
switch on the 9414 printer for on-demand mode. Refer to your
Equipment Manual for more information.
E3. batch_sep Batch Separator (striped label in between batches). Options:
0 Does not print a separator (default)
1 Prints a separator
E4. print_mult Number of tags with the same image. Range: 1 to 999
E5. multi_part Number of identical parts on one tag. Range: 1 to 5
Example E,0,1,4,2 p
Defines a batch control field. Continuous feed mode is used and
a separator prints between batches. Four tags have the same
image and there are two identical parts on one tag.
6-4 Printing