Filter
Top Products
05/08 Rev. AB OPERATOR’S HANDBOOK Care & Maintenance
9844/9854
3-5
Cleaning the Print Roller
Clean the print roller when you see
adhesive buildup or dirt on the roller.
1. Turn off the printer and disconnect the
power supply.
2. Remove the material and ribbon.
¯ You can easily access the print roller if
you remove the tear-off edge (1) first.
3. Remove the tear-off edge and unfasten
the screw (2) in the middle of the tear-off
edge with a size 10 Torx screwdriver
(Fig. 2).
4. Moisten a lint-free cloth with isopropyl
alcohol and wipe the print roller (Fig. 3)
clean. Turn the roller with your finger to
clean all the way around.
5. Replace the tear-off edge.
1
2
3