Paxar AAFES Printer User Manual


 
Setting Up the Printer 2-1
SETTING UP THE PRINTER
You must configure the printer before printing formats.
The most common configuration options are listed in the following
table:
Option Choices Default
Baud Rate 1200, 2400, 4800, 9600,
19200, 38400, 57600,
115200
19200
Format Sending Mode As Needed/Always As Needed
Separators Enabled/Disabled Disabled
Preloading Enabled/Disabled Disabled
Print Mode Continuous/On Demand Continuous
Supply Type Black Mark/Die Cut Black Mark
Ribbon With Ribbon/Without Without
Setting the Baud Rate
To print, you must change the baud rate setting to 9600 from the
default setting of 19200.
1. Press
from the Main Menu. You see
Exit – Are you
sure? Y/N
2. Press Y. You see
MAIN MENU
Scripts
3. Press or until you see
MAIN MENU
Setup
4. Press Enter. You see
SETUP
Comm 1
2