Paxar Monarch 9416 Printer User Manual


 
1-6 Getting Started
4. Remove a supply holder guide from one end of the
supply holder. The supply holder is normally
attached with a line to the inside of the printer.
5. Slide a roll of labels onto the supply holder.
Note: If the core diameter on your roll of labels is 1
inch in diameter, remove the 1.5-inch supply
core adapters from the supply holder guides.
6. Slide the supply holder guide back onto the end of
the supply holder.
Supply Holder Guides
Supply Holder
1.5” Supply Core
Adapter