Using Batteries 2-3
Replacing the Backup Battery
The backup battery is a 3V lithium coin cell. You can buy additional backup
batteries at most stores, part # CR2032. Switch backup batteries when you
receive a CMOS error.
Cautions:
♦ Risk of explosion if the battery is replaced by an incorrect type!
♦ Dispose or recycle to your local regulations.
1. Remove the main battery.
2. Remove the backup battery by turning it slightly counterclockwise, and
pulling it out.
3. At the same angle, place the new battery (positive side facing away from
the main battery) at the edge of the track and under the spring contact.
As you push it in, it will straighten itself. The battery should lie flat.
4. Slide the compartment door shut until it clicks into place.
Backup
Battery