Filter
Top Products
1-2 Equipment Manual
Getting Started
To start using the printer, you must:
1. Review the printer safety information in the Regulatory Compliance
document provided with your printer.
2. Charge the battery. See “Charging the Battery” in Chapter 2 for more
information.
Note: Charge the battery as soon as you receive the printer, even if you
do not use it right away.
3. Insert the charged battery in the printer. See “Changing the Battery” in
Chapter 2 for more information.
4. Attach the safety strap found in the documentation package. See
“Attaching the Safety Strap ” later in this chapter for more information.
5. Load supplies in the printer. See “Loading Supplies” in Chapter 3 for
more information.
6. Turn on the printer.
Helpful Reminders
♦ Always start with a fully charged battery.
♦ Attach the safety strap to your wrist before using the printer.
♦ Do not pound the printer when applying labels printed in peel mode.
♦ Switch to a fully charged battery every time you load a new roll of
supplies. This ensures optimum print quality.
♦ Turn off the printer when you are not using it.
♦ Operate and store the printer within the recommended temperature and
humidity ranges. See “Specifications” in Appendix A for more
information.